CONFIRM THE PART FITS
Exercise Cycle Crank Bearing Set (replaces 176991, 244513) 295560
Part #295560
Part Information
This crank bearing set (part number 295560) is for exercise cycles.
Crank bearing set 295560 supports the crank and pulley.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- Exercise Cycle Crank and PulleyPart #318345In Stock$98.99 |9% OFF Phone Price : $108.99
- Crank/PulleyPart #359280In Stock$123.99
- Exercise Cycle Pedal, Left (replaces 134368)Part #374670In Stock$17.09 |10% OFF Phone Price : $19.09
- Elliptical Drive BeltPart #201296In Stock$36.99 |12% OFF Phone Price : $41.99
- Elliptical BeltPart #150716In Stock$17.99
- Exercise Cycle Drive BeltPart #176559Back Order$24.89 |17% OFF Phone Price : $29.89
- Exercise Cycle FlywheelPart #328421In Stock$222.07
- Exercise Cycle Pedal, RightPart #134367Replaced by #374671?Manufacturer substitutionThis part replaces 134367. Substitute parts can look different from the original.In Stock$15.38 |12% OFF Phone Price : $17.38
- Crank CoverPart #358701In Stock$16.49
- Exercise Cycle Pedal, Right (replaces 134367)Part #374671In Stock$15.38 |12% OFF Phone Price : $17.38
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #PFEX25121 Proform exercise cycle | PFEX25121 | Whirlwind Shop Parts |
| Model #831280180 Proform exercise cycle | 831280180 | Frame assembly Shop Parts |
| Model #831280182 Proform exercise cycle | 831280182 | Cycle Shop Parts |
| Model #831280441 Proform exercise cycle | 831280441 | Cycle Shop Parts |
| Model #PFEX25122 Proform exercise cycle | PFEX25122 | Cycle Shop Parts |
| Model #831218220 Proform exercise cycle | 831218220 | Exercise bike Shop Parts |
| Model #WLEL42070 Weslo elliptical machine | WLEL42070 | Unit parts Shop Parts |
| Model #PFEX39911 Proform exercise cycle | PFEX39911 | Frame/console/side shield Shop Parts |
| Model #831280181 Proform exercise cycle | 831280181 | Frame/console/side shield Shop Parts |
| Model #831306811 Deflecto exercise cycle | 831306811 | Console/frame/seat/side shields Shop Parts |
Reviews
Easy to install
Took about 30 minutes, make sure bearings are orientated right and pedals move freely
Dn4155, Syracuse, in.
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Incorrect parts
When I went to install the bearing two of the four inside races where suppose to have a different Inside diameters to fit correctly. I had to use both of the old inside races in order to use these bearing. I hope they last a little while.
arn52, Milbank SD
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Experience was an asset here.
This one takes special tools and patience. I give this one a low overall rating because of difficulty and the need for specialized tools. The outer race was easy enough to remove but the inner race was the challenge. I removed mine with a hammer and punch; it was on there very tight and it took several complete rotations before the threads started to move easy enough to finish by hand. It would have been nice if there had been some written instructions telling you where you would find left hand threads and how to adjust the bearing load. I would recommend adding additional grease - on the races before assembly and extra on the bearings too.
Pete, Portland Me.
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
good quality
No directions. Need to include a drawing to indicate if the bearing go in or out and a packet of heavy grease.
Will, Sacramento, CA
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
If you have worked on bikes stright forward
I had to fab a simple press with a C-clamp to install the outer bearing races, as was expected. It went together very well.
Robocidal M, Michigan
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Stationary bike
This was exactly what I needed to fix my stationary bike.
Rgoodwin, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Bearings
I been using my exercise bike for many years. I always kept extra parts-including bearings-just in case they wear out.
Mickey1948, Bryant, AR
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Couldn't believe Sears part direct have in stock.
Purchase bearing for my indoor bicycle form this wed site. perfectly fit. Couldn't believe they have it in stock. Only this site/store has it. Came on time. Bought parts for my washer before. Will purchase from this site again.
Handyman e, Brooklyn New York
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend