前言

学校最近在安装校园网，然后我也就试着用ensp搭建了一下，还请大佬多多指教啊

一、校园网拓扑图

下面是AP进入就绪状态

二、地址规划 

三、配置命令

1.二层配置

代码如下：

1. LSW5

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]undo info ena
Info: Information center is disabled.
[Huawei]vlan batch 2 4 6
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]port l trunk 
[Huawei-GigabitEthernet0/0/1]port trunk allow vlan 1 2 4
[Huawei-GigabitEthernet0/0/1]q
[Huawei]int e0/0/1
[Huawei-Ethernet0/0/1]port l acc
[Huawei-Ethernet0/0/1]port def vlan 6
[Huawei-Ethernet0/0/1]q
[Huawei]int g0/0/2
[Huawei-GigabitEthernet0/0/2]port l trunk 
[Huawei-GigabitEthernet0/0/2]port trunk allow vlan 1 2 4 6
[Huawei-GigabitEthernet0/0/2]q
[Huawei]

 LSW2 和 LSW3 的命令行和接口配置过程和LSW1相同，后面的就自己配置啦

 2. LSW8

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]undo info ena
Info: Information center is disabled.
[Huawei]vlan batch 3 5 7
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]port l trunk 
[Huawei-GigabitEthernet0/0/1]port trunk allow vlan 1 3 5
[Huawei-GigabitEthernet0/0/1]q
[Huawei]int g0/0/2
[Huawei-GigabitEthernet0/0/2]port l trunk 
[Huawei-GigabitEthernet0/0/2]port trunk allow vlan 1 3 5 7 
[Huawei-GigabitEthernet0/0/2]q
[Huawei]int e0/0/1
[Huawei-Ethernet0/0/1]port l acc
[Huawei-Ethernet0/0/1]port def vlan 7
[Huawei-Ethernet0/0/1]q

 LSW9的命令行和接口配置过程和LSW1相同，后面的就自己配置啦

2、三层配置

 3.LSW2

三层交换机接出去有两条链路，这he里我们做一个Eth-trunk 来实现负载均衡。

src-dst-mac 这条语句的意思是根据源mac和目标mac进行分流

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]undo info ena
Info: Information center is disabled.
[Huawei]vlan batch 8 9 10
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]port l acc
[Huawei-GigabitEthernet0/0/1]port def vlan 8
[Huawei-GigabitEthernet0/0/1]int g0/0/2
[Huawei-GigabitEthernet0/0/2]port l acc
[Huawei-GigabitEthernet0/0/2]port def vlan 9
[Huawei-GigabitEthernet0/0/2]int g0/0/3
[Huawei-GigabitEthernet0/0/3]port l acc
[Huawei-GigabitEthernet0/0/3]port def vlan 10
[Huawei-GigabitEthernet0/0/3]q
[Huawei]int eth-trunk 1
[Huawei-Eth-Trunk1]mode lacp 
[Huawei-Eth-Trunk1]max active 2
[Huawei-Eth-Trunk1]load-balance src-dst-mac //根据源mac和目标mac进行分流
[Huawei-Eth-Trunk1]q
[Huawei]int g0/0/4
[Huawei-GigabitEthernet0/0/4]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei-GigabitEthernet0/0/4]int g0/0/5
[Huawei-GigabitEthernet0/0/5]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei-GigabitEthernet0/0/5]int eth-trunk 1
[Huawei-Eth-Trunk1]port l trunk 
[Huawei-Eth-Trunk1]port trunk allow vlan 8 9 10
[Huawei-Eth-Trunk1]q
[Huawei]

4. LSW3

LSW3接出去也是用Eth-trunk链路聚合技术来实现负载均衡，配置路由协议，使全网通讯

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]undo info ena 
Info: Information center is disabled.
[Huawei]vlan batch 2 4 6 11
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]port l trunk 
[Huawei-GigabitEthernet0/0/1]port trunk allow vlan 1 2 4 6
[Huawei-GigabitEthernet0/0/1]int g0/0/2
[Huawei-GigabitEthernet0/0/2]port l trunk 
[Huawei-GigabitEthernet0/0/2]port trunk allow vlan 1 2 4 6
[Huawei-GigabitEthernet0/0/2]int g0/0/3
[Huawei-GigabitEthernet0/0/3]port l trunk 
[Huawei-GigabitEthernet0/0/3]port trunk allow vlan 1 2 4 6
[Huawei-GigabitEthernet0/0/3]q
[Huawei]int eth-trunk 1
[Huawei-Eth-Trunk1]mode lacp 
[Huawei-Eth-Trunk1]max active 2
[Huawei-Eth-Trunk1]load-balance src-dst-mac
[Huawei-Eth-Trunk1]q
[Huawei]int g0/0/4 
[Huawei-GigabitEthernet0/0/4]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei-GigabitEthernet0/0/4]q
[Huawei]int g0/0/5 
[Huawei-GigabitEthernet0/0/5]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei-GigabitEthernet0/0/5]q
[Huawei]int eth-trunk 1
[Huawei-Eth-Trunk1]port l trunk 
[Huawei-Eth-Trunk1]port trunk allow vlan 1 2 4 11
[Huawei-Eth-Trunk1]q
[Huawei]int vlanif 2
[Huawei-Vlanif2]ip add 192.168.2.254 24
[Huawei-Vlanif2]int vlanif 4
[Huawei-Vlanif4]ip add 192.168.4.254 24
[Huawei-Vlanif4]int vlanif 6
[Huawei-Vlanif6]ip add 192.168.6.254 24
[Huawei-Vlanif6]int vlanif 11
[Huawei-Vlanif11]ip add 192.168.11.254 24
[Huawei-Vlanif11]q
[Huawei]ospf 7
[Huawei-ospf-7]area 1
[Huawei-ospf-7-area-0.0.0.1]net 192.168.2.0 0.0.0.255
[Huawei-ospf-7-area-0.0.0.1]net 192.168.4.0 0.0.0.255
[Huawei-ospf-7-area-0.0.0.1]net 192.168.6.0 0.0.0.255
[Huawei-ospf-7-area-0.0.0.1]net 192.168.11.0 0.0.0.255
[Huawei-ospf-7-area-0.0.0.1]q
[Huawei-ospf-7]dhcp ena
Info: The operation may take a few seconds. Please wait for a moment.done.
[Huawei]int vlanif 2
[Huawei-Vlanif2]dhcp se int //启动dhcp服务器基于接口地址池的IP地址分配方式
[Huawei-Vlanif2]int  vlanif 4
[Huawei-Vlanif4]dhcp se int 
[Huawei-Vlanif4]q
[Huawei]

 5.LSW4

LSW4和LSW3的配置大差不差，差不了多少

同样的用Eth-trunk链路聚合技术来实现负载均衡

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]undo info ena
Info: Information center is disabled.
[Huawei]vlan batch 3 5 7 12
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]port l trunk 
[Huawei-GigabitEthernet0/0/1]port trunk allow vlan 1 3 5 7
[Huawei-GigabitEthernet0/0/1]q
[Huawei]int g0/0/2
[Huawei-GigabitEthernet0/0/2]port l trunk 
[Huawei-GigabitEthernet0/0/2]port trunk allow vlan 1 3 5 7
[Huawei-GigabitEthernet0/0/2]q
[Huawei]int eth-trunk 1
[Huawei-Eth-Trunk1]mode lacp 
[Huawei-Eth-Trunk1]max active 2
[Huawei-Eth-Trunk1]load-balance src-dst-mac
[Huawei-Eth-Trunk1]q
[Huawei]int g0/0/3
[Huawei-GigabitEthernet0/0/3]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei-GigabitEthernet0/0/3]int g0/0/4
[Huawei-GigabitEthernet0/0/4]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei-GigabitEthernet0/0/4]int  eth-trunk 1
[Huawei-Eth-Trunk1]port l trunk 
[Huawei-Eth-Trunk1]port trunk allow vlan 1 3 5 12
[Huawei-Eth-Trunk1]q
[Huawei]int vlanif 3
[Huawei-Vlanif3]ip add 192.168.3.254 24
[Huawei-Vlanif3]int vlanif 5
[Huawei-Vlanif5]ip add 192.168.5.254 24
[Huawei-Vlanif5]int vlanif 7
[Huawei-Vlanif7]ip add 192.168.7.254 24
[Huawei-Vlanif7]int vlanif 12
[Huawei-Vlanif12]ip add 192.168.12.254 24
[Huawei-Vlanif12]q
[Huawei]ospf 8
[Huawei-ospf-8]area 1
[Huawei-ospf-8-area-0.0.0.1]net 192.168.3.0 0.0.0.255
[Huawei-ospf-8-area-0.0.0.1]net 192.168.5.0 0.0.0.255
[Huawei-ospf-8-area-0.0.0.1]net 192.168.7.0 0.0.0.255
[Huawei-ospf-8-area-0.0.0.1]net 192.168.12.0 0.0.0.255
[Huawei-ospf-8-area-0.0.0.1]q
[Huawei-ospf-8]q
[Huawei]dhcp ena
Info: The operation may take a few seconds. Please wait for a moment.done.
[Huawei]int vlanif 3
[Huawei-Vlanif3]dhcp se int 
[Huawei-Vlanif3]int vlanif 5
[Huawei-Vlanif5]dhcp se int
[Huawei-Vlanif5]q
[Huawei]

 LSW1算是核心的三层设备了，同样也是配置Eth-trunk链路聚合技术来实现负载均衡

 LSW1配置命令

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]undo info ena
Info: Information center is disabled.
[Huawei]vlan batch 2 3 4 5 8 9 10 11 12
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei]int eth-trunk 1
[Huawei-Eth-Trunk1]mode lacp 
[Huawei-Eth-Trunk1]max active 2
[Huawei-Eth-Trunk1]load-balance src-dst-mac
[Huawei-Eth-Trunk1]q
[Huawei]int eth-trunk 2
[Huawei-Eth-Trunk2]mode lacp 
[Huawei-Eth-Trunk2]max active 2
[Huawei-Eth-Trunk2]load-balance src-dst-mac
[Huawei-Eth-Trunk2]q
[Huawei]int eth-trunk 3
[Huawei-Eth-Trunk3]mode lacp 
[Huawei-Eth-Trunk3]max active 2
[Huawei-Eth-Trunk3]load-balance src-dst-mac
[Huawei-Eth-Trunk3]q
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei-GigabitEthernet0/0/1]int g0/0/2
[Huawei-GigabitEthernet0/0/2]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei-GigabitEthernet0/0/2]int g0/0/3
[Huawei-GigabitEthernet0/0/3]eth-trunk 2
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei-GigabitEthernet0/0/3]int g0/0/4
[Huawei-GigabitEthernet0/0/4]eth-trunk 2
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei-GigabitEthernet0/0/4]int g0/0/5
[Huawei-GigabitEthernet0/0/5]eth-trunk 3
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei-GigabitEthernet0/0/5]int g0/0/6
[Huawei-GigabitEthernet0/0/6]eth-trunk 3
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei-GigabitEthernet0/0/6]q
[Huawei]int eth-trunk 1
[Huawei-Eth-Trunk1]port l trunk
[Huawei-Eth-Trunk1]port trunk allow vlan 1 2 4 11
[Huawei-Eth-Trunk1]int eth-trunk 2
[Huawei-Eth-Trunk2]port l trunk
[Huawei-Eth-Trunk2]port trunk allow vlan 1 3 5 12
[Huawei-Eth-Trunk2]int eth-trunk 3
[Huawei-Eth-Trunk3]port l trunk
[Huawei-Eth-Trunk3]port trunk allow vlan 8 9 10
[Huawei-Eth-Trunk3]q
[Huawei]int g0/0/7
[Huawei-GigabitEthernet0/0/7]port l trunk 
[Huawei-GigabitEthernet0/0/7]port trunk allow vlan 1 to 5
[Huawei-GigabitEthernet0/0/7]q
[Huawei]int vlanif 1
[Huawei-Vlanif1]ip add 192.168.1.254 24
[Huawei-Vlanif1]q
[Huawei]int vlanif 8
[Huawei-Vlanif8]ip add 192.168.8.254 24
[Huawei-Vlanif8]q
[Huawei]int vlanif 9
[Huawei-Vlanif9]ip add 192.168.9.254 24
[Huawei-Vlanif9]q
[Huawei]int vlanif 10
[Huawei-Vlanif10]ip add 192.168.10.254 24
[Huawei-Vlanif10]q
[Huawei]int vlanif 11
[Huawei-Vlanif11]ip add 192.168.11.254 24
[Huawei-Vlanif11]q
[Huawei]int vlanif 12
[Huawei-Vlanif12]ip add 192.168.12.254 24
[Huawei-Vlanif12]q
[Huawei]ospf 9
[Huawei-ospf-9]area 1
[Huawei-ospf-9-area-0.0.0.1]net 192.168.1.0 0.0.0.255
[Huawei-ospf-9-area-0.0.0.1]net 192.168.8.0 0.0.0.255
[Huawei-ospf-9-area-0.0.0.1]net 192.168.9.0 0.0.0.255
[Huawei-ospf-9-area-0.0.0.1]net 192.168.10.0 0.0.0.255
[Huawei-ospf-9-area-0.0.0.1]net 192.168.11.0 0.0.0.255
[Huawei-ospf-9-area-0.0.0.1]net 192.168.12.0 0.0.0.255
[Huawei-ospf-9-area-0.0.0.1]q
[Huawei-ospf-9]q
[Huawei]dhcp ena
Info: The operation may take a few seconds. Please wait for a moment.done.
[Huawei]int vlanif 1
[Huawei-Vlanif1]dhcp se int 
[Huawei-Vlanif1]q
[Huawei]

 3.AC配置重头戏来啦

[AC6005]undo info ena
Info: Information center is disabled.
[AC6005]
[AC6005]vlan batch 2 3 4 5
Info: This operation may take a few seconds. Please wait for a moment...done.
[AC6005]
[AC6005]int g0/0/1
[AC6005-GigabitEthernet0/0/1]
[AC6005-GigabitEthernet0/0/1]port l trunk 
[AC6005-GigabitEthernet0/0/1]
[AC6005-GigabitEthernet0/0/1]port trunk allow vlan 1 to 5
[AC6005-GigabitEthernet0/0/1]
[AC6005-GigabitEthernet0/0/1]q
[AC6005]
[AC6005]int vlanif 1
[AC6005-Vlanif1]
[AC6005-Vlanif1]ip add 192.168.1.253 24
Error: The address already exists.
[AC6005-Vlanif1]
[AC6005-Vlanif1]q
[AC6005]
[AC6005]wlan  //从系统识视图进入wlan视图
[AC6005-wlan-view]
[AC6005-wlan-view]ap-gr name apg1  //创建AP组
[AC6005-wlan-ap-group-apg1]
[AC6005-wlan-ap-group-apg1]q
[AC6005-wlan-view]
[AC6005-wlan-view]ap-gr name apg2  //创建AP组
[AC6005-wlan-ap-group-apg2]
[AC6005-wlan-ap-group-apg2]q
[AC6005-wlan-view]

配置设备的国家码

[AC6005-wlan-view] regulatory-domain-profile name domain

这条语句创建域管理模板，并进入域管理模板视图，若域管理模板已经存在，则直接进入域管理识图模板。

[AC6005-wlan-view] country-code CN

这条语句配置设备的国家码

[AC6005-wlan-view]regulatory-domain-profile name domain
//创建域管理模板，并进入域管理模板视图，若域管理模板已经存在，则直接进入域管理识图模板。
[AC6005-wlan-regulate-domain-domain]country-code CN  //配置设备的国家码
Info: The current country code is same with the input country code.
[AC6005-wlan-regulate-domain-domain]q
[AC6005-wlan-view]

 然后进入ap组配置引用域管理模板

AC6005-wlan-ap-group-apg2]regulatory-domain-profile domain

这条语句是在指定AP或者AP中引用域管理模板

[AC6005-wlan-view]ap-gr name apg1  //创建名为apg1的ap组
[AC6005-wlan-ap-group-apg1]reg domain  //在指定AP或者AP中引用域管理模板
Warning: Modifying the country code will clear channel, power and antenna gain c
onfigurations of the radio and reset the AP. Continue?[Y/N]:
Error: Please choose 'YES' or 'NO' first before pressing 'Enter'. [Y/N]:y
[AC6005-wlan-ap-group-apg1]ap-gr name apg2  //创建名为apg2的ap组
[AC6005-wlan-ap-group-apg2]reg domain  //在指定AP或者AP中引用域管理模板
Warning: Modifying the country code will clear channel, power and antenna gain c
onfigurations of the radio and reset the AP. Continue?[Y/N]:y
[AC6005-wlan-ap-group-apg2]q
[AC6005-wlan-view]
​

查看AP的MAC地址

如果不知道AP的mac地址有两种方式查看

方法一

右键点设置

注意AP开启的时候是不能复制MAC地址的

方法二 

在AP的CLI窗口输入 dis int vlan1  即可查看vlan1的信息，当然也有AP的mac地址

配置AP鉴别模式

[AC6005]capwap source interface Vlanif 1 

 指定CAPWAP隧道的源端接口。该源端接口是某个VLAN对应的IP 接口

[AC6005-wlan-view]ap auth-mode mac-auth

ap auth-mode mac-auth 其实是一种鉴别方式，采用MAC 地址进行鉴别模式

ap auth-mode mac-auth{ mac-auth | no-auth | sn-auth}

sn-auth 表示采用序列号鉴别模式

no-auth 表示不对AP进行鉴别

注意⚠警告⚠信息

Warning: This operation may cause AP reset. If the country code changes, it will
 clear channel, power and antenna gain configurations of the radio, Whether to c
ontinue? [Y/N]:y

//警告：该操作会导致AP重置，如果国家码改变，射频的配置信息会清空，是否继续？这里需继续，输入y，按enter键即可

[AC6005]capwap sou int vlanif 1  
//指定CAPWAP隧道的源端接口。该源端接口是某个VLAN对应的IP 接口
[AC6005]wlan
[AC6005-wlan-view]ap auth-mode mac-auth
//ap auth-mode mac-auth 其实是一种鉴别方式，采用MAC 地址进行鉴别模式
[AC6005-wlan-view]ap-id 1 ap-mac 00e0-fc45-4ac0
[AC6005-wlan-ap-1]ap-name AP1
[AC6005-wlan-ap-1]ap-gr apg1
Warning: This operation may cause AP reset. If the country code changes, it will
 clear channel, power and antenna gain configurations of the radio, Whether to c
ontinue? [Y/N]:y
//警告：该操作会导致AP重置，如果国家码改变，射频的配置信息会清空，是否继续？这里需继续，输入y，按enter键即可
Info: This operation may take a few seconds. Please wait for a moment.. done.
[AC6005-wlan-ap-1]ap-id 2 ap-mac 00e0-fc4e-3c70  //采用MAC 地址进行鉴别模式
[AC6005-wlan-ap-2]ap-name AP2
[AC6005-wlan-ap-2]ap-gr apg1
Warning: This operation may cause AP reset. If the country code changes, it will
 clear channel, power and antenna gain configurations of the radio, Whether to c
ontinue? [Y/N]:y
Info: This operation may take a few seconds. Please wait for a moment.. done.
[AC6005-wlan-ap-2]ap-id 3 ap-mac 00e0-fcff-6180   //采用MAC 地址进行鉴别模式
[AC6005-wlan-ap-3]ap-name AP3
[AC6005-wlan-ap-3]ap-gr apg1
Warning: This operation may cause AP reset. If the country code changes, it will
 clear channel, power and antenna gain configurations of the radio, Whether to c
ontinue? [Y/N]:y
Info: This operation may take a few seconds. Please wait for a moment.. done.
[AC6005-wlan-ap-3]ap-id 4 ap-mac 00e0-fc45-1c40   //采用MAC 地址进行鉴别模式
[AC6005-wlan-ap-4]ap-name AP4
[AC6005-wlan-ap-4]ap-gr apg2
Warning: This operation may cause AP reset. If the country code changes, it will
 clear channel, power and antenna gain configurations of the radio, Whether to c
ontinue? [Y/N]:y
Info: This operation may take a few seconds. Please wait for a moment.. done.
[AC6005-wlan-ap-4]ap-id 5 ap-mac 00e0-fc95-3690   //采用MAC 地址进行鉴别模式
[AC6005-wlan-ap-5]ap-name AP5
[AC6005-wlan-ap-5]ap-gr apg2
Warning: This operation may cause AP reset. If the country code changes, it will
 clear channel, power and antenna gain configurations of the radio, Whether to c
ontinue? [Y/N]:y
Info: This operation may take a few seconds. Please wait for a moment.. done.
[AC6005-wlan-ap-5]q
[AC6005-wlan-view]

 创建安全模板

[AC6005-wlan-view]security-profile name se-1 //创建安全模板命名为se-1
[AC6005-wlan-sec-prof-se-1]security wpa2 psk pass-phrase 12345678 aes
//配置鉴别和wap2加密机制
Warning: The current password is too simple. For the sake of security, you are a
dvised to set a password containing at least two of the following: lowercase let
ters a to z, uppercase letters A to Z, digits, and special characters. Continue?
 [Y/N]:y
//警告：当前密码太简单。为了安全起见，你是建议设置至少包含以下两项的密码：小写let
字母a到z、大写字母a到z、数字和特殊字符是否继续？输入y，按enter键
[AC6005-wlan-view]secur name se-2  //创建安全模板命名为se-2
[AC6005-wlan-sec-prof-se-2]security wpa2 psk pass-phrase 12345678 aes
//配置鉴别和wap2加密机制
Warning: The current password is too simple. For the sake of security, you are a
dvised to set a password containing at least two of the following: lowercase let
ters a to z, uppercase letters A to Z, digits, and special characters. Continue?
 [Y/N]:y

创建SSID模板

[AC6005-wlan-view]ssid-profile name 模板名字  //创建模板

[AC6005-wlan-ssid-prof-ssid4]ssid wifi-1  //命名WiFi名

[AC6005-wlan-view]ssid name ssid1  //创建ssid模板
[AC6005-wlan-ssid-prof-ssid1]ssid wifi-1  //命名模板
Info: This operation may take a few seconds, please wait.done.
[AC6005-wlan-ssid-prof-ssid1]q
[AC6005-wlan-view]ssid name ssid2  //创建ssid模板
[AC6005-wlan-ssid-prof-ssid2]ssid wifi-2  //命名模板
Info: This operation may take a few seconds, please wait.done.
[AC6005-wlan-ssid-prof-ssid2]q
[AC6005-wlan-view]ssid name ssid3  //创建ssid模板
[AC6005-wlan-ssid-prof-ssid3]ssid wifi-3  //命名模板
Info: This operation may take a few seconds, please wait.done.
[AC6005-wlan-ssid-prof-ssid3]q
[AC6005-wlan-view]ssid name ssid4  //创建ssid模板
[AC6005-wlan-ssid-prof-ssid4]ssid wifi-4  //命名模板
Info: This operation may take a few seconds, please wait.done.
[AC6005-wlan-ssid-prof-ssid4]q
[AC6005-wlan-view]

创建VAP模板

[AC6005-wlan-view]vap-pro name vap1  //创建VAP模板，命名为vap1
[AC6005-wlan-vap-prof-vap1]for tunnel  
//指定数据转发的方式，或者指定隧道（tunnel）或者指定直接转发模式（direct-forward）方式
//这里使用隧道转发
[AC6005-wlan-vap-prof-vap1]se vlan-id 2
//指定VAP的业务VLAN，即用于转发数据的VLAN
[AC6005-wlan-vap-prof-vap1]secur se-1
//用于在指定VAP模板下引用安全模板
[AC6005-wlan-vap-prof-vap1]ssid-pro ssid1
//用于在指定VAP模板下引用SSID模板
[AC6005-wlan-vap-prof-vap1]q
[AC6005-wlan-view]vap-pro name vap2
//创建VAP模板，命名为vap2
[AC6005-wlan-vap-prof-vap2]for tunnel 
//指定数据转发的方式，或者指定隧道（tunnel）或者指定直接转发模式（direct-forward）方式
//这里使用隧道转发
[AC6005-wlan-vap-prof-vap2]se vlan-id 4
//指定VAP的业务VLAN，即用于转发数据的VLAN
[AC6005-wlan-vap-prof-vap2]secur se-2
//用于在指定VAP模板下引用安全模板
[AC6005-wlan-vap-prof-vap2]ssid-pro ssid2
//用于在指定VAP模板下引用SSID模板
[AC6005-wlan-vap-prof-vap2]
​

同理可得

[AC6005-wlan-view]vap-pro name vap3
[AC6005-wlan-vap-prof-vap3]for tunnel
[AC6005-wlan-vap-prof-vap3]se vlan-id 3
[AC6005-wlan-vap-prof-vap3]secur se-1
[AC6005-wlan-vap-prof-vap3]ssid-pro ssid3
//退到wlan视图
[AC6005-wlan-view]vap-pro name vap4
[AC6005-wlan-vap-prof-vap4]for tunnel
[AC6005-wlan-vap-prof-vap4]se vlan-id 5
[AC6005-wlan-vap-prof-vap4]secur se-2
[AC6005-wlan-vap-prof-vap4]ssid-pro ssid4
[AC6005-wlan-vap-prof-vap4]q
[AC6005-wlan-view]

为射频引用VAP模板

[AC6005-wlan-view]ap-gr name apg1
[AC6005-wlan-ap-group-apg1]vap-pro vap1 wlan 1 rad 0  //为射频引用VAP模板
//为射频引用VAP模板。wlan前面是VAP模板名称，wlan后面是VAP模板编号，不同业务对应不同的VAP模板编号。radio 后面是射频的编号
[AC6005-wlan-ap-group-apg1]vap-pro vap1 wlan 1 rad 1  //为射频引用VAP模板
[AC6005-wlan-ap-group-apg1]vap-pro vap2 wlan 2 rad 0  //为射频引用VAP模板
[AC6005-wlan-ap-group-apg1]vap-pro vap2 wlan 2 rad 1  //为射频引用VAP模板
[AC6005]wlan
[AC6005-wlan-view]ap-gr name apg2
[AC6005-wlan-ap-group-apg2]vap-pro vap3 wlan 3 rad 0  //为射频引用VAP模板
[AC6005-wlan-ap-group-apg2]vap-pro vap3 wlan 3 rad 1  //为射频引用VAP模板
[AC6005-wlan-ap-group-apg2]vap-pro vap4 wlan 4 rad 0  //为射频引用VAP模板
[AC6005-wlan-ap-group-apg2]vap-pro vap4 wlan 4 rad 1  //为射频引用VAP模板
[AC6005-wlan-ap-group-apg2]q
[AC6005-wlan-view]
//到这里就可以等待AP就绪啦

最后AP就绪

结束啦！看到这里的都比个♥

总结

以上就是今天要讲的内容啦，很开心，自己手动配置出校园网，欢迎大佬指点不足啦